Product Showcase


Tuowen CNC, Craft Precision, Create Value.

PCF Portable Plasma & Flame Cutting Machine

The PCF Series is TWCNC's portable CNC cutting platform for fabricators who need automated cutting without a fixed bed. The entire machine sits directly on the steel plate: an aluminum-alloy frame,modular crossbeam and rail sections are assembled by one or two people, plugged into single-phase 22…

Product Category: Plasma cutting machine

Tel:+86-13012543158

brand: Tuowen

Product Details

PCF Series Portable CNC Plasma & Flame Cutting Machine | TWCNC
TWCNC · PCF Series

PCF Series Portable CNC Plasma & Flame Cutting Machine

Place It on the Plate and Cut · 220 V Single-Phase · Dual-Process Plasma + Oxy-Fuel

The PCF Series is TWCNC's portable CNC cutting platform for fabricators who need automated cutting without a fixed bed. The entire machine sits directly on the steel plate: an aluminum-alloy frame,modular crossbeam and rail sections are assembled by one or two people, plugged into single-phase 220 V power, and the CNC takes over. Plasma handles stainless, aluminum and thin-to-medium carbon steel; oxy-fuel takes over on thick plate where plasma becomes uneconomical. One portable unit, two cutting processes, no foundation and no dedicated cutting bay.

1500 × 3000 mm          Standard Cutting Area
5–200 mm          Flame Cutting Thickness
220 V          Single-Phase Power
Plasma + Flame          Dual-Process Capability
Get PCF Series Solution & Quote →

PCF Series: The Cutting Machine That Goes to the Plate

A conventional CNC cutting table requires the plate to come to the machine. The PCF Series reverses that logic. Its aluminum-alloy modular frame and rail system are assembled directly over or beside the workpiece, and the cutting head travels across the plate on a lightweight gantry. The machine can be disassembled into manageable sections for transport between workshop bays or job sites — the practical definition of “portable” in a fabrication context. Standard effective cutting area is 1500 × 3000 mm, with length extendable by adding rail sections; width is typically configurable up to approximately 2000 mm depending on frame specification.

The dual-process architecture is the PCF Series' second defining feature. A plasma torch and an oxy-fuel torch share the same carriage (typically one torch fitted at a time, with quick changeover). Plasma covers stainless steel, aluminum, copper and thin-to-medium carbon steel, with thickness capability determined by the plasma power source selected — 60 A to 200 A sources are commonly specified, and the machine is compatible with major plasma brands including Hypertherm. Oxy-fuel covers carbon steel from 5 mm to 200 mm, with 200 mm+ available on custom specification. For a fabrication shop that cuts 1 mm stainless on Monday and 80 mm carbon steel on Friday, the PCF Series covers both jobs without a second machine or second cutting bay.

Place-on-Plate Portable Design            1500 × 3000 mm Standard Area            Plasma + Oxy-Fuel Dual Process            220 V Single-Phase            Extendable Rail Length
PCF Series Portable CNC Plasma and Flame Cutting Machine

Built for the Job That Moves

The PCF Series is specified when the plate cannot come to fixed table — because it is too large, because the work is on site, or because dedicating floor space to a cutting bed does not make sense for the production mix.

🧳

Place-on-Plate Modular Design

The aluminum-alloy frame and rail sections assemble directly over or beside the workpiece. No foundation, no pit, no fixed cutting bay. The machine breaks down into transportable sections and can be moved between workshop areas or loaded for site work by one or two people.

🔀

Plasma + Oxy-Fuel Dual Process

One carriage accepts either a plasma torch or an oxy-fuel torch. Plasma covers stainless, aluminum, copper and thin-to-medium carbon steel; oxy-fuel covers carbon steel from 5 mm to 200 mm. The process is chosen per job, not per machine purchase.

🔌

220 V Single-Phase Operation

The CNC and drive system run on standard single-phase 220 V power. No three-phase supply, no dedicated electrical infrastructure — the machine plugs into the same supply as a workshop welder or hand tool.

🪶

Aluminum Alloy Frame & Linear Guides

The frame is formed from extruded aluminum-alloy profiles, stress-relieved and oxidation-treated for dimensional stability. Steel cylindrical linear guides and precision roller bearings carry the carriage, delivering smooth travel and repeatable positioning without the weight of steel-bed machine.

📐

CNC Nesting & Arbitrary Shapes

A dedicated portable CNC system handles nesting, common-line cutting and arbitrary contour programming. Standard features include graphic preview, breakpoint memory and steel-plate alignment correction. Cutting accuracy is typically held within ±0.5 mm/m, with nesting software supplied or supported for material yield optimization.

🛡️

Torch Height Control & Anti-Collision

Plasma cutting uses arc-voltage torch height control (AVC/THC) to maintain nozzle stand-off on uneven plate; flame cutting uses motorized lift with adjustable height. A spring-loaded anti-collision mount protects the torch if it contacts the workpiece or a tip-up.

Plasma thickness is a function of the power source, not the machine frame. The PCF Series carriage and CNC are compatible with plasma sources across the common 60–200 A range. A 60–100 A source typically handles 1–20 mm carbon steel and thin stainless; 120–200 A sources extend clean cutting into the 25–35 mm range on carbon steel, with severance capability beyond that. The plasma thickness figures in the specification table below are therefore expressed as a range tied to source selection. Oxy-fuel thickness is independent of the plasma source and is governed by the torch and gas supply.

PCF Series Technical Specifications

The following specifications are indicative for the standard PCF Series portable CNC plasma/flame configuration. Cutting area, rail length, plasma source and CNC options are confirmed per project based on the plate sizes, thickness range and site conditions.

ParameterPCF Series (Indicative Configuration)
Machine TypePortable CNC Plasma & Oxy-Fuel Cutting Machine (place-on-plate / modular)
Standard Effective Cutting Area1500 × 3000 mm (width × length) · length extendable with additional rail sections
Cutting Width OptionsUp to approx. 2000 mm (frame-dependent)
Cutting ProcessesPlasma · Oxy-fuel flame (torch changeover on same carriage)
Flame Cutting Thickness5 – 200 mm carbon steel (standard) · 200 mm+ on custom specification
Plasma Cutting ThicknessDepends on plasma source: approx. 1–20 mm (60–100 A) · up to 25–35 mm clean cut (120–200 A); severance beyond
Plasma Source Compatibility60 A / 100 A / 120 A / 160 A / 200 A · major brands including Hypertherm compatible
Input Power (CNC / Drive)AC 220 V ± 10% · single-phase · 50/60 Hz · approx. 500–1000 W
Flame Cutting SpeedUp to approx. 3500 mm/min (material and thickness dependent)
Rapid / Traverse SpeedUp to 8000 mm/min (CNC-dependent)
Positioning / Mechanical AccuracyApprox. ±0.5 mm/m (typical mechanical running accuracy) · CNC system resolution higher
Frame & GuideExtruded aluminum-alloy frame · steel cylindrical linear guides · precision roller bearings
DriveStepper motor · rack-and-pinion X/Y
Torch Height ControlPlasma: arc-voltage THC · Flame: motorized lift · anti-collision mount
CNC SystemDedicated portable CNC · graphic preview · breakpoint memory · nesting software support
Flame GasOxygen + acetylene or propane
Plasma GasCompressed air (standard) · O₂ / N₂ for specialty plasma sources
Machine Weight (reference)Approx. 128 – 180 kg (configuration-dependent, CNC + frame without plasma source)[reference:11][reference:12]

* Specifications above are indicative and based on typical portable CNC plasma/flame configurations in the PCF Series class. Effective cutting area, rail length, plasma source rating and CNC selection are confirmed per project. Plasma cutting thickness is governed by the plasma power source, not the machine frame; the range shown reflects common 60–200 A sources and varies with material, gas and cut-quality requirement. Flame cutting thickness above 200 mm requires custom torch and gas specification. Machine weight excludes the plasma power source and gas cylinders. TWCNC's standard fixed-bed plasma/flame and gantry cutting platforms are available where floor space and production volume justify a dedicated installation. Please contact TWCNC for the confirmed configuration and a cutting assessment for your plate sizes and material mix.

Where the Plate Is Too Big to Bring to the Machine

The PCF Series suits fabrication and installation work where the workpiece is large, the location is not  fixed cutting bay, or the production mix does not justify a dedicated CNC table.

On-Site Construction & Installation        Equipment Installation & Plant Maintenance        Large Steel Plate Cutting        General Fabrication Job Shops        Machinery & Equipment Manufacturing        Shipbuilding & Repair        Bridge & Infrastructure Fabrication        Field Repair & Emergency Cutting        Workshops Without Fixed Cutting Bays

Discuss Your PCF Series Configuration

Tell us your plate sizes, thickness range, material mix and whether the machine will work in a fixed bay or move between sites. The TWCNC application team will confirm the appropriate cutting area, rail length, plasma source rating and CNC configuration, and support you with cutting samples or a site-assessment for portable operation.

       Contact TWCNC for a Solution →      

Place-on-Plate Portable Design · Plasma + Oxy-Fuel Dual Process · 220 V Single-Phase · No Foundation Required

Related Products