Product Showcase


Tuowen CNC, Craft Precision, Create Value.

HG Series Heavy CNC plasma cutting machine

The HG Series is TWCNC's heavy-duty gantry platform for large-format plasma and oxy-fuel cutting. Built on stress-relieved box-beam gantry with dual-side rack-and-pinion drive, it carries one or more plasma and flame torches across spans from 3 to 12 meters, handling carbon steel, stainless, alum…

Product Category: Plasma cutting machine

Tel:+86-13012543158

brand: TW CNC

Product Details

HG Series Heavy-Duty Gantry Plasma & Flame Cutting Machine | TWCNC
TWCNC · HG Series

HG Series Heavy-Duty Gantry Plasma & Flame Cutting Machine

3–12 m Span · Multi-Torch Capability · Plasma to 400 A · Flame to 200 mm+

The HG Series is TWCNC's heavy-duty gantry platform for large-format plasma and oxy-fuel cutting. Built on stress-relieved box-beam gantry with dual-side rack-and-pinion drive, it carries one or more plasma and flame torches across spans from 3 to 12 meters, handling carbon steel, stainless, aluminum and other metals in thicknesses that desktop and portable machines cannot reach. Where the plate is large, the cut is heavy and the production rhythm is continuous, the HG Series is the fixed cutting station that holds accuracy shift after shift.

3–12 m          Gantry Span
Up to 400 A          Plasma Source Capability
5–200 mm+          Flame Cutting Thickness
Multi-Torch          Plasma + Flame Configuration
Get HG Series Solution & Quote →

HG Series: A Fixed Gantry Built Around Heavy Plate

The HG Series is defined by its gantry. A box-beam welded structure — stress-relieved after welding to prevent long-term deformation — travels on heavy rails with dual-side rack-and-pinion drive]. The longitudinal rails are made from U71Mn high-strength heavy rail, ground and polished, and the transverse guide uses linear rails for smooth, accurate travel across the span. This is the architecture that allows a single machine to cover plates that would otherwise need to be repositioned or cut on a larger bed: effective cutting widths commonly range from 2.2 m to 7.3 m+, with custom spans reaching 12 meters and rail lengths of 12–60 meters depending on the configuration.

The HG Series is configured as plasma-first platform with integrated flame capability. Plasma sources from 200 A to 400 A cover stainless, aluminum and carbon steel in the thin-to-medium range — 400 A source typically delivers clean cuts up to roughly 50 mm on steel, with severance capability beyond that. Flame cutting extends the envelope to 5–200 mm on carbon steel (up to 300 mm on specific torch and gas configurations), making the same gantry suitable for both sheet metal and thick structural plate. Multiple torch stations can be specified: plasma torch, one or more flame torches, and strip-cutting torches for simultaneous multi-part production.

3–12 m Gantry Span            Box-Beam Stress-Relieved Structure            Plasma 200–400 A            Flame 5–200 mm+            Multi-Torch Configuration
HG Series Heavy-Duty Gantry Plasma and Flame Cutting Machine

Built for the Plate That Does Not Fit Anywhere Else

The HG Series is specified when the workpiece is measured in meters, the cut is thick, and the production rhythm demands a fixed gantry that does not move between jobs.

🏗️

Box-Beam Gantry with Stress Relief

The crossbeam is a welded box structure, heat-treated and vibration-aged after welding to eliminate internal stress. This is what allows the gantry to hold its geometry across years of heavy cutting without the sag or twist that affects lighter frames.

🛤️

Heavy Rail + Dual-Side Drive

Longitudinal rails are U71Mn high-strength heavy rail, precision-ground on the top and sides. Dual-side rack-and-pinion drive with planetary reducers keeps the gantry synchronized across spans up to 12 meters, eliminating the skew that single-side drive produces on wide formats.

⚡

Plasma to 400 A, Flame to 200 mm+

One platform covers two processes. Plasma handles stainless, aluminum, copper and carbon steel with source-dependent thickness capability (roughly 1–50 mm clean cut on a 400 A source). Flame extends carbon steel cutting to 200 mm standard, 300 mm on specific configurations — no second machine for thick plate.

🔀

Multi-Torch Simultaneous Cutting

The gantry can carry multiple torch stations: plasma, flame, and strip-cutting torches. Mirror cutting and same-direction multi-torch operation allow several identical or different parts to be cut simultaneously, multiplying output from the same gantry pass.

📐

THC & Automatic Ignition

Plasma uses arc-voltage torch height control; flame uses capacitive or motorized height control with automatic ignition. Torch lift stroke of approximately 200 mm accommodates plate unevenness and tip-ups without manual intervention.

💨

Extraction & Cutting Environment

Plasma cutting produces smoke and arc glare. The HG Series can be specified with downdraft extraction or water-table cutting to capture fume at the source — a practical requirement for high-duty plasma operation that portable and desktop formats cannot integrate as effectively.

Plasma thickness is a source decision, flame thickness is a torch decision. The HG Series gantry does not set the plasma cutting thickness — the plasma power source does. A 200 A source covers thin-to-medium plate; 400 A source extends clean cutting into the 40–50 mm range on carbon steel, with severance beyond. Flame cutting is governed by the torch, gas supply and tip selection, and reaches 200 mm as standard. The specification table below expresses plasma capability as a source range and flame capability as torch range, so the two        processes are not conflated.

HG Series Technical Specifications

The following specifications are indicative for the standard HG Series heavy-duty gantry plasma/flame configuration. Span, rail length, plasma source, torch count and extraction options are confirmed per project based on the plate sizes and material mix.

ParameterHG Series (Indicative Configuration)
Machine TypeHeavy-Duty Gantry CNC Plasma & Flame Cutting Machine
Gantry Span (Rail Gauge)3000 – 12000 mm (custom spans available)
Effective Cutting WidthApprox. 2200 – 9200 mm (span minus structural clearance)
Rail Length / Effective Cutting Length12000 – 60000 mm rail · effective length configurable to plate requirements
Cutting ProcessesPlasma · Oxy-fuel flame · Plasma + flame dual-process
Plasma Source Options200 A / 300 A / 400 A · Hypertherm, Kjellberg, LGK and major brands compatible
Plasma Cutting Thickness (Reference)Approx. 1–50 mm clean cut on carbon steel (400 A class) · source-dependent
Flame Cutting Thickness5 – 200 mm carbon steel standard · up to 300 mm on specific torch/gas configuration
Torch Configuration1–2 plasma torches + 1–4 flame torches · strip-cutting torches optional
Drive SystemDual-side rack-and-pinion · AC servo or stepper (configuration-dependent)
Cutting Speed (Plasma)0 – 4000 mm/min (TWCNC standard plasma configuration)
Cutting Speed (Flame)50 – 750 mm/min
Rapid / Traverse SpeedUp to 12000 mm/min (higher on specific drive configurations)
Cutting PrecisionApprox. ±0.5 mm/1000 mm (mechanical) · 0.05 mm resolution on CNC
Torch Lift StrokeApprox. 200 mm
Torch Height ControlPlasma: arc-voltage THC · Flame: capacitive / motorized · automatic ignition
CNC SystemIndustrial CNC · nesting software · USB / network transfer
Flame GasOxygen + acetylene / propane / natural gas
Plasma GasCompressed air · O₂ / N₂ for high-precision plasma sources
Extraction OptionDowndraft table or water table (optional)
Input VoltageAC 380 V / 50–60 Hz (three-phase) · 220 V single-phase on smaller configurations
Certification / WarrantyCE · 18–24 months (TWCNC standard terms)

* Specifications above are indicative and based on TWCNC's gantry heavy-industry plasma/flame configuration and typical heavy-duty gantry specifications in this class. Span, rail length, effective cutting width, plasma source rating and torch count are confirmed per project. Plasma cutting thickness is governed by the plasma power source, not the gantry; the 1–50 mm reference reflects 400 A class source and varies with material, gas and cut-quality requirement. Flame cutting above 200 mm requires specific torch, tip and gas configuration. CNC resolution and mechanical accuracy are distinct figures and should not be conflated. TWCNC's desktop DT Series and portable PCF Series cover smaller and mobile requirements. Please contact TWCNC for the confirmed specification sheet, rail layout drawing and a cutting assessment for your plate sizes and material mix.

Where the Plate Is Large and the Cut Is Heavy

The HG Series suits fabrication environments where the workpiece is a large steel plate, the cutting station is fixed, and plasma or flame remains the economical process for the thickness involved.

Shipbuilding & Offshore Structures        Heavy Engineering Machinery        Steel Structure Fabrication        Pressure Vessels & Boilers        Mining & Construction Equipment        Bridge & Infrastructure Components        Wind Power & Heavy Flanges        Large Plate Job Shops        Rail Transit & Locomotive Parts

Discuss Your HG Series Gantry Configuration

Tell us your maximum plate width, length, thickness range and material mix. The TWCNC application team will confirm the appropriate gantry span, rail length, plasma source rating and torch configuration, and provide rail foundation layout drawing along with a cutting capability assessment for your work.

       Contact TWCNC for a Solution →      

3–12 m Gantry Span · Plasma to 400 A · Flame to 200 mm+ · Multi-Torch Configuration

Related Products