Pure Air Cooling · 500 g Handheld Head · Weld, Cut and Clean — No Chiller, No Water Lines
The AC Series removes the last piece of fixed infrastructure from handheld laser processing: the water chiller. Built around RayTools' QCS air-cooled handheld welding system, it delivers welding, cutting, weld-seam cleaning and remote cleaning from 500 g handheld head — with the entire machine cooled by air. There is no chiller to site, no coolant to change, and no water lines trailing across the workshop. For fabrication, installation and maintenance work that moves around the shop or goes on site, the AC Series is the handheld laser that travels as easily as the toolbag.
The AC Series is TWCNC's air-cooled counterpart to the water-cooled MF Series. The core difference is RayTools' QCS air-cooled handheld welding system — a fully integrated package that combines the laser source, control system and handheld head into one air-cooled platform. The handheld head weighs approximately 500 g, roughly half the weight of a typical four-in-one water-cooled head, and the machine itself requires no chiller, no coolant loop and no water-to-air heat exchanger. Setup consists of plugging into 220 V single-phase power and starting work.
The QCS platform uses a dual-screen interaction system: a parameter adjustment knob works in tandem with a touchscreen, and welding modes switch with one button. RayTools states that a new operator can be productive in about 30 seconds. The system is modular — laser source, torch and cooling method are configured as matched set, with compatibility across major laser source brands. The AC Series supports four functions: welding, cutting, weld-seam cleaning and remote cleaning, with wobble welding for heat distribution and gap bridging. A wire feeder is included on the RayTools air-cooled four-in-one configuration, supporting 0.8–1.6 mm wire.

The AC Series is not water-cooled machine with the chiller removed. It is different operating model: lighter, more portable, maintenance-free on the cooling side, and sized for the duty cycle of real handheld work.
The entire machine is air-cooled. No chiller, no coolant, no water lines, no filter changes on a cooling circuit. The QCS system uses a dedicated air-cooled laser platform and an air-cooled handheld head, eliminating the maintenance burden and floor-space requirement of water cooling.
At approximately 500 g, the QCS handheld head is among the lightest four-in-one heads available. Reduced wrist load matters over a full shift of vertical, overhead or out-of-position welding — the operator fatigues later and maintains control longer.
Welding, cutting, weld-seam cleaning and remote cleaning are available from the same handheld unit. Wobble ranges are process-matched: 0–5 mm for welding, 0–10 mm for weld-seam cleaning and 0–80 mm for remote cleaning, so one tool covers joint preparation through post-weld finish.
The parameter knob and touchscreen work together: rotate for fast adjustment, tap for mode changes. Welding modes switch with one button, and RayTools positions the learning curve at roughly 30 seconds for a new operator. Pre-set process libraries reduce dependence on welding experience.
The QCS platform is built as a matched kit: laser source, torch and cooling are configured together, with compatibility across major fiber laser brands. This gives fabricators flexibility on source selection without redesigning the handheld system around a single supplier.
Multiple safety protections are built in, including automatic beam shut-off when the nozzle leaves the workpiece. The RayTools air-cooled four-in-one configuration includes a wire feeder with 0.8 / 1.0 / 1.2 / 1.6 mm wire capability and 0.1–18 m/min feed speed, supporting gap bridging and filler-wire joints.
The following specifications are indicative for the standard AC Series configuration built around RayTools' air-cooled handheld welding system. Power level, wire-feeding arrangement and laser source brand are confirmed per project based on the material mix and working environment.
| Parameter | AC Series (Indicative Configuration) |
|---|---|
| Machine Type | Air-Cooled Multifunctional Handheld Laser Welding / Cutting / Cleaning Machine |
| Laser Power Options | 1000 W / 1200 W / 1500 W |
| Handheld System | RayTools QCS air-cooled handheld welding system |
| Handheld Head Weight | Approx. 500 g |
| Functions | Welding · Cutting · Weld-Seam Cleaning · Remote Cleaning |
| Wobble Range | Welding: 0–5 mm · Weld-Seam Cleaning: 0–10 mm · Remote Cleaning: 0–80 mm |
| Welding Thickness (Reference) | Up to approx. 2 mm (1000 W) · 2.5 mm (1200 W) · 3 mm (1500 W) on stainless steel |
| Welding Speed (Reference) | 0–20 mm/s (process and material dependent) |
| Cooling | Pure air cooling (laser source and handheld head) · no chiller / no coolant |
| Control / Interface | Dual-screen interaction: parameter knob + touchscreen · one-button welding mode switching |
| Wire Feeding | Included on RayTools four-in-one air-cooled configuration · 0.8 / 1.0 / 1.2 / 1.6 mm wire · 0.1–18 m/min feed |
| Laser Source | Air-cooled fiber laser · brand configured per project (QCS platform compatible with major brands) |
| Collimation / Focus | 60 mm collimation · 150 mm focus (typical) |
| Power Supply | AC 220 V / single-phase / 50–60 Hz |
| Applicable Materials | Stainless steel, carbon steel, galvanized sheet, aluminum (thin-to-medium gauge) |
* Specifications above are indicative and based on the RayTools QCS air-cooled handheld welding system and the RayTools air-cooled four-in-one configuration. Welding thickness and speed figures are reference values measured on stainless steel and vary with material grade, joint preparation, assist gas and focus position. Air-cooled platforms are duty-cycle limited: continuous emission is time-restricted by cooling capacity, and the machine is intended for intermittent handheld operation rather than continuous production-line welding. The 500 g head weight refers to the QCS handheld head; total system weight and footprint depend on the selected laser source and enclosure. Please contact TWCNC for the confirmed configuration and a welding procedure assessment for your materials and duty cycle.
The AC Series suits fabrication, installation and repair work that is mobile, spread across multiple locations, or performed in short passes where a water chiller would be an obstacle rather than an asset.
Tell us your material types, thickness range, whether you need wire feeding, and how the machine will move between jobs. The TWCNC application team will confirm the appropriate AC Series power level, QCS handheld configuration and air-cooled laser source, and support you with welding samples or process validation for your duty cycle.
Contact TWCNC for a Solution →RayTools QCS Air-Cooled System · 500 g Handheld Head · No Chiller, No Coolant · Four-in-One Capability