Product Showcase


Tuowen CNC, Craft Precision, Create Value.

L series large format gantry laser cutting machine

Modular Ultra-Large Format, Up to 60 kW — Cutting Giant Plates in a Single PassConventional laser cutting is constrained by a fixed table: the workpiece must fit inside a rectangle, or it must be cut in sections and joined later. The L Series breaks that constraint by replacing the table with ground…

Product Category: Sheet Metal Cutting Machine

Tel:+86-13012543158

brand: Tuowen

Product Details

L Series Ground-Rail Gantry Fiber Laser Cutting Machine | TWCNC
TWCNC · L Series

L Series Ground-Rail Gantry Fiber Laser Cutting Machine

Modular Ultra-Large Format, Up to 60 kW — Cutting Giant Plates in a Single Pass

The L Series is TWCNC's ground-rail gantry platform built for the largest and thickest metal plates in heavy industry. With a modular track foundation that starts at 12 meters and extends in 4-meter increments, working widths from 1.5 to 3.5 meters, and laser power from 12 kW to 60 kW, it eliminates the need to section, reposition or re-fixture oversized workpieces. From shipbuilding plates to wind-tower flanges and heavy machinery chassis, the L Series cuts full-length parts in one continuous pass — on a superheavy bed engineered to hold accuracy        under sustained ultra-high-power thermal load.

12–30 m+          Modular Track Length
Up to 60 kW          Ultra-High Laser Power
1.5–3.5 m          Working Width Range
±0.05 mm/m          Positioning Accuracy
Get L Series Solution & Quote →

L Series: The Track Defines the Machine, Not the Table

Conventional laser cutting is constrained by a fixed table: the workpiece must fit inside a rectangle, or it must be cut in sections and joined later. The L Series breaks that constraint by replacing the table with ground-level rail foundation. The gantry travels along the track, the workpiece sits on separated support platform, and the cutting length is determined by the length of the rail — not by the machine bed. Standard configurations begin at 12 × 2 meters, with lengths extendable to 16, 20, 24 or 30 meters and beyond, and widths from 1.5 to 3.5 meters.

This architecture is paired with TWCNC's superheavy steel welding bed technology developed specifically for 30–60 kW operation: 16 mm monolithic steel plate, groove-welded equal-strength butt joints, stress annealing and natural aging, and a heat-isolated hollow structure beneath the cutting zone. The result is gantry platform that does not just carry ultra-high power — it holds geometry and accuracy while doing so, shift after shift, on the largest plates industry produces.

Ground-Rail Modular Track            12–30 m+ Cutting Length            Up to 60 kW Laser Power            Superheavy 16 mm Bed            Separated Work Platform
L Series Ground-Rail Gantry Fiber Laser Cutting Machine

Engineered for Plates That Do Not Fit Anywhere Else

The L Series solves different problem from table-based machines: not how fast a small part can be cut, but how giant part can be cut once, accurately, without repositioning or splicing.

🛤️

Modular Ground-Rail Architecture

The track is built in extendable modules starting at 12 m, with 2 m increments and customizable lengths up to 30 m and beyond. Capacity grows with the business — without replacing the machine.

⚡

Up to 60 kW Ultra-High Power

Configured with 12 / 20 / 30 / 40 / 60 kW laser sources, the L Series cuts thick carbon steel, stainless and aluminum with the speed and edge quality that only high-power density can deliver on large sections.

🏗️

30–60 kW Superheavy Welded Bed

16 mm monolithic steel plate, groove-welded equal-strength joints, stress annealing and natural aging. The bed is designed from the outset for sustained ultra-high-power thermal cycling, not adapted from a lower-power platform.

❄️

Heat-Isolated Hollow Bed Structure

No bed link sits directly beneath the cutting zone. The hollow design minimizes heat conduction into the frame, protecting track alignment and gantry geometry when 60 kW is applied to thick plate for extended periods.

🔀

Separated Bed & Work Platform

The machine bed and the workpiece support platform are structurally separated. Cutting vibration and thermal load are isolated from the precision track, while the platform can be maintained or reconfigured independently.

🎯

Gantry Stability Over Full Travel

Gantry dual-drive with high-torque integrated direct drive maintains synchronization across long spans, while follow-up supports prevent beam sagging over extended widths. Positioning accuracy holds at ±0.05 mm/m over the full track length.

L Series Technical Specifications

The L Series is modular platform. Track length, working width, laser power and bed configuration are specified per project based on the maximum workpiece envelope and material thickness. The table below shows standard configuration ranges; final parameters are confirmed in the project specification.

ParameterL Series (Modular Configuration)
Machine TypeGround-Rail Gantry Fiber Laser Cutting Machine
Track Length Options12 m / 16 m / 20 m / 24 m / 30 m / Extendable (12 + N m)
Working Width Options1.5 m / 2.0 m / 2.5 m / 3.0 m / 3.5 m (customizable)
Laser Power Range12 kW / 20 kW / 30 kW / 40 kW / 60 kW
Bed StructureSuperheavy Welded Bed · 16 mm Monolithic Steel · Stress Annealed · Heat-Isolated Hollow Design
Bed / PlatformSeparated Machine Bed and Work Support Platform
Beam StructureT6 Heat-Treated Aviation Aluminum Alloy Beam with Follow-Up Supports
Cutting Thickness (Reference)Up to 100 mm (depending on laser power and material)
Positioning Accuracy±0.05 mm/m
Repeat Positioning Accuracy±0.03 mm
Max. Traverse Speed60–100 m/min (power and configuration dependent)
Drive StructureGantry Dual-Drive · High-Torque Integrated Direct Drive · Rack & Pinion
Control SystemHigh-Power Bus CNC System (FSCUT / BOCHU)
Laser HeadAuto-Focus High-Power Cutting Head (BOCI / Raytools / Precitec options)
Fume ExtractionZoned / Follow-Up Extraction Along Crossbeam
Power SupplyAC 380 V / 50–60 Hz (high-power configurations per project)

* The L Series is a project-configured gantry platform. Track length, width, laser power, bed specification and foundation requirements are determined by the maximum workpiece size and material thickness. The cutting thickness reference depends on laser power, material grade and process gas. Please contact TWCNC for a track layout drawing and cutting capability assessment based on your actual workpiece envelope.

Where the Workpiece Is Measured in Meters, Not Millimeters

The L Series is specified when the part cannot be repositioned, when splicing is unacceptable, or when the combination of extreme length and extreme thickness rules out a table-based machine.

Shipbuilding & Offshore        Wind Power Components        Heavy Engineering Machinery        Steel Structure & Bridges        Rail Transit & Locomotive        Mining & Construction Equipment        Large Flanges & Rings        Heavy Vehicle Chassis        Oil & Gas Fabrication        Ultra-Large Plate Job Shops

Specify Your L Series Track

Tell us the maximum workpiece length, width, material grade and thickness, and your required daily throughput.The TWCNC application team will propose the track length, working width, laser power and bed configuration,and provide a foundation layout drawing along with a cutting capability assessment.

       Contact TWCNC for a Solution →      

Modular Track Design · 30–60 kW Bed Technology · Project-Specific Layout Support

Related Products