Fixed-Bed Rigidity · Integrated Worktable · High-Speed Precision Cutting for Thin-to-Medium Plate
The DT Series is TWCNC's desktop CNC plasma cutting platform — fixed-bed machine built for workshops that cut sheet metal day in and day out and need repeatable accuracy, not just mobility. The worktable is part of the machine: the plate sits on a dedicated cutting bed, the gantry runs on precision linear guides, and the CNC executes the nesting program without the setup variability of a place-on-plate portable unit. It is the plasma cutting station for the fabricator who has a fixed production spot and wants the machine to stay there.
The DT Series is built around a fixed worktable. Unlike a portable CNC that sits on the plate, the DT Series brings the plate onto a dedicated bed: a rigid steel frame carries the cutting grate, the gantry travels on precision linear guides above it, and the workpiece is positioned once and cut without being disturbed. This fixed relationship between bed, gantry and workpiece is what makes repeatability possible. The standard effective working area is 1500 × 3000 mm, with width and length extendable in modular increments.
The DT Series is configured as plasma-first platform with optional flame capability. Plasma covers stainless, aluminum, copper, galvanized sheet and mild steel, with thickness capability governed by the plasma power source selected — the machine is compatible with Huayuan LGK series sources from 100 A to 300 A, as well as major imported brands. Flame cutting is available as option for carbon steel from 5 mm to 200 mm, extending the machine's range without requiring a second bed. For workshop whose core work is thin-to-medium sheet cutting on fixed footprint, the DT Series is the stable, dedicated alternative to a portable unit.

The DT Series is specified when the cutting station is fixed, the sheet sizes are consistent, and the priority is repeatable output rather than portability.
The worktable is a structural part of the machine, not a separate support. A rigid steel frame carries the cutting grate and the gantry rails, so the relationship between torch and workpiece stays constant cut after cut. This is the foundation of the DT Series' repeatability.
The standard working area accommodates the most common sheet size in fabrication. Width and length are extendable in modular increments, so the bed can grow with the work without replacing the machine.
Compatible with Huayuan LGK series 100 A / 120 A / 200 A / 300 A plasma sources and imported brands. The power source is selected to the thickness range, not fixed at purchase — 100 A class for thin sheet, 200–300 A for thicker plate and faster cut speeds.
An oxy-fuel torch can be specified alongside the plasma torch for carbon steel from 5 mm to 200 mm (300 mm on specific configurations). The DT Series can be delivered as a plasma-only machine, a flame-only machine, or a dual-process platform.
The gantry runs on precision linear guides with dual-side drive (servo or stepper, configuration-dependent). Cutting speed reaches 50–8800 mm/min and rapid traverse reaches 12000 mm/min, giving fast positioning between cuts without sacrificing bed stability.
The fixed-bed format is compatible with downdraft extraction tables or water tables. Plasma cutting generates smoke and dust; a dedicated extraction bed captures it at the source rather than letting it disperse into the workshop — a practical advantage that a place-on-plate portable unit cannot match.
The following specifications are based on TWCNC's standard DT Series desktop CNC plasma cutting configuration (model TW1530T / DT1530T). Working area, plasma source, drive type and flame option are confirmed per project.
| Parameter | DT Series (TWCNC Standard) |
|---|---|
| Machine Type | Desktop CNC Plasma Cutting Machine (fixed bed, integrated worktable) |
| Model Reference | TW1530T / DT1530T |
| Effective Working Area | 1500 × 3000 mm (width × length) · extendable in modular increments |
| Cutting Modes | Plasma standard · Flame optional · Plasma + Flame dual-process optional |
| Plasma Cutting Thickness | Common 1–30 mm (governed by plasma source; 100–300 A range) |
| Flame Cutting Thickness | 5–200 mm carbon steel (specific configurations up to 300 mm) |
| Plasma Source Compatibility | Huayuan LGK series 100 A / 120 A / 200 A / 300 A · imported brands compatible |
| Drive System | Dual-side drive · servo motor or stepper motor (configuration-dependent) |
| Cutting Speed | 50 – 8800 mm/min |
| Rapid Traverse Speed | 12000 mm/min |
| Guide / Transmission | Precision linear guides · gear-and-rack transmission |
| Torch Height Control | Automatic or mechanical (configuration-dependent) · THC sensor |
| CNC Controller | China or imported controller (configuration-dependent) |
| Nesting Software | Professional nesting software · CAD / DXF / DWG support |
| Cutting Gas | Plasma: compressed air (standard) · Flame: oxygen + propane / acetylene |
| Input Voltage | 220 V / 380 V / 415 V / 440 V (customizable) |
| Extraction Option | Downdraft table or water table (optional) |
| Certification | ISO · CE |
| Warranty | 24 months |
* Specifications above are based on TWCNC's standard TW1530T / DT1530T desktop CNC plasma cutting configuration.Effective working area, plasma source rating, drive type and flame-cutting option are confirmed per project.Plasma cutting thickness is governed by the plasma power source, not the machine frame; the common 1–30 mm range reflects 100–300 A sources and varies with material and cut-quality requirement. Flame cutting above 200 mm requires specific torch and gas configuration. TWCNC's portable PCF Series is available where mobility is required instead of fixed bed. Please contact TWCNC for the confirmed specification sheet and cutting assessment for your sheet sizes and material mix.
The DT Series suits workshops with a dedicated cutting area, consistent sheet sizes and a production rhythm that rewards repeatability over mobility.
Tell us your typical sheet sizes, material types, thickness range and whether you need flame capability alongside plasma. The TWCNC application team will confirm the appropriate working area, plasma source rating, drive configuration and extraction option, and support you with cutting samples or a bed layout drawing for your workshop.
Contact TWCNC for a Solution →24-Month Warranty · ISO / CE Certified · Installation & Training Support · 7×24 Remote Diagnosis