16 mm Superheavy Bed Platform · Up to 40 kW · Sheet and Tube on One Heat-Isolated Foundation
The GP Series takes the superheavy welded bed architecture of the G Series — 16 mm monolithic steel plate,stress annealing, natural aging and a heat-isolated hollow structure — and adds a side-mounted tube cutting module. The same gantry and laser head that cut thick plate can be switched to process round, square and rectangular tube up to 6 meters. For heavy fabrication operations where thick plate and structural tube arrive on the same floor, the GP Series delivers both capabilities on a foundation built to hold accuracy under sustained high-power thermal load.
The GP Series is built on the same 16 mm superheavy steel welded bed that defines the G Series. Groove-welded equal-strength joints, stress annealing and natural aging eliminate internal stress, while the heat-isolated hollow structure beneath the cutting zone reduces thermal conduction into the frame during high-power thick-plate processing. This is not a light-duty dual-purpose frame with tube module bolted on; it is a heavy production foundation with tube capability integrated into the platform.
The tube module is mounted alongside the sheet table and shares the gantry and laser head. Round tube from Φ20 to Φ220 mm, square and rectangular profiles within an equivalent envelope, and tube lengths up to 6 meters are handled by a pneumatic dual-chuck system. The open-bed layout preserves the accessibility of the G platform, while the tube module is configured for the practical range of structural and mechanical tube rather than the extreme long-tube, high-volume production that a dedicated tube line is built for . Optional servo-follow support and ±45° bevel cutting extend the module for longer or weld-ready tube work.

The GP Series is specified when the plate work is heavy and the tube work is real — but the volume or variety of tube does not justify a dedicated tube production line.
The bed is built from 16 mm monolithic steel plate, groove-welded for equal-strength joints, then stress-annealed and naturally aged. It provides the structural rigidity required for thick-plate cutting at high power — and the stable foundation the tube module depends on.
No bed link sits directly beneath the cutting zone. The hollow structure reduces thermal conduction into the frame during sustained high-power cutting, protecting bed geometry and the alignment of both the sheet table and the tube module.
A single gantry and laser head serve both the plate table and the side-mounted tube module. Switching between plate and tube requires a program change, not a machine changeover — the same heavy foundation supports both processes.
Front and rear pneumatic self-centering chucks handle round tube Φ20–220 mm and square/rectangular profiles within an equivalent envelope, with tube lengths up to 6 meters. Clamping force is adjustable for different wall thicknesses.
Servo-driven support rollers track tube rotation and adjust height in real time. On longer or heavier tube work, this suppresses sag and tail-end whip that would otherwise compromise cut accuracy on a dual-purpose platform.
A tube bevel cutting head produces V-, Y-, K- and X-type weld preparations up to ±45° in the same setup as the cut-off, eliminating a secondary chamfering operation for structural and mechanical tube assemblies.
The following specifications are indicative for the GP Series heavy-duty sheet-and-tube integrated configuration, built on the G Series superheavy bed platform. Tube module range, laser power and optional features are specified per project based on the plate thickness and tube mix.
| Parameter | GP Series (Indicative Configuration) |
|---|---|
| Machine Type | Heavy-Duty Open-Type Sheet & Tube Integrated Fiber Laser Cutting Machine |
| Bed Structure | 16 mm Superheavy Steel Welded Bed · Stress Annealed · Natural Aged · Heat-Isolated Hollow Design |
| Beam Material | T6 Heat-Treated Aviation Aluminum Alloy |
| Sheet Working Area | 3000 × 1500 mm / 4000 × 2000 mm / 6000 × 2500 mm (customizable) |
| Laser Power Range | 6000 W / 12000 W / 20000 W / 30000 W / 40000 W |
| Tube Cutting Length | 3 m / 6 m |
| Tube Diameter / Section Range | Round Φ20 – Φ220 mm · Square / rectangular within equivalent envelope |
| Tube Clamping | Pneumatic dual-chuck · self-centering · adjustable clamping force |
| Positioning Accuracy | ±0.03 mm (sheet) · tube accuracy dependent on module configuration |
| Repeat Positioning Accuracy | ±0.02 mm |
| Max. Acceleration | 1.0 – 1.2 G |
| Max. Traverse Speed | 80 – 100 m/min (power and configuration dependent) |
| Servo-Follow Support | Optional |
| Bevel Cutting | Optional ±45° (V / Y / K / X weld preparation) |
| Control System | High-Power Bus CNC · sheet and tube dedicated modules |
| Laser Head / Source | Auto-Focus High-Power Head · Raycus / IPG / MAX (configuration-dependent) |
| Applicable Materials | Carbon steel, stainless steel, aluminum plate · round / square / rectangular tube |
| Power Supply | AC 380 V / 50–60 Hz (high-power configurations per project) |
* Specifications above are indicative and based on the GP Series heavy-duty sheet-and-tube integrated configuration built on the G Series superheavy bed platform. Bed dimensions, laser power, tube module range and optional features vary with the selected working area and material thickness. Servo-follow support and ±45° bevel cutting are optional and must be specified at order. TWCNC's standard sheet-and-tube integrated line is also available as the X Series for lighter or smaller-format requirements. Please contact TWCNC for the confirmed specification sheet and a process assessment based on your plate thickness and tube mix.
The GP Series suits heavy fabrication environments where thick plate is the primary workload, but structural or mechanical tube is also part of the order mix — and dedicated tube line would be underutilized.
Tell us your maximum plate thickness, typical plate sizes, tube diameters, wall thicknesses and maximum tube length. The TWCNC application team will recommend the appropriate GP Series bed configuration, laser power and tube module setup, and provide cutting samples or process validation support for your mixed heavy-fabrication requirements.
Contact TWCNC for a Solution →16 mm Superheavy Bed Platform · Up to 40 kW · Sheet & Tube on One Foundation