Superheavy Bed Structure Built for Thick Plate, High Power and Long-Term Stability
The GD Series is heavy-duty single-table fiber laser cutting machine built around TWCNC's superheavy steel welding bed technology. Designed for thick-plate processing and high-power laser operation, it delivers the structural rigidity, heat resistance and long-term accuracy stability required in engineering machinery, steel structures, shipbuilding and heavy metal fabrication.
The GD Series is TWCNC's heavy-duty answer to the demands of high-power fiber laser cutting. Its defining feature is a superheavy steel welding bed built from 16 mm monolithic steel plate, joined by groove welding to achieve equal-strength butt joints. The bed then undergoes stress annealing and natural aging treatment to eliminate internal stress, ensuring the machine maintains extremely high stability and cutting accuracy over years of heavy production.
The bed adopts a special hollow structure with no bed link directly beneath the laser cutting area. This design significantly reduces heat accumulation and thermal influence on the bed, allowing the GD Series to handle high-power laser sources and thick-plate cutting without the distortion risks common in lighter machine frames. Combined with an aviation aluminum alloy beam processed through T6 heat treatment, the gantry system achieves high strength, reduced weight and faster dynamic response.

Every design decision in the GD Series serves the same goal — maintaining flatness, alignment and cutting accuracy when the machine is pushed hard by high-power lasers and heavy steel plates.
The bed is laser-blanked from 16 mm monolithic steel plate and joined by groove welding for equal-strength butt joints, providing exceptional structural rigidity for thick-plate cutting.
No bed link exists directly beneath the cutting area. This hollow structure reduces thermal conduction into the frame, protecting bed geometry when cutting thick plates at high laser power.
After welding, the bed undergoes stress annealing and natural aging treatment to eliminate internal stress and maintain long-term dimensional stability and cutting accuracy.
The beam is T6 heat-treated for maximum strength and optimized weight, improving acceleration response while maintaining rigidity during high-power cutting.
Imported high-precision reducers and rack-and-pinion drive, combined with servo control, keep positioning accuracy stable at ±0.03 mm and repeatability at ±0.02 mm.
Available with high-power laser sources and auto-focus cutting heads optimized for carbon steel, stainless steel and aluminum thick-plate processing, with cutting capability validated against real production requirements.
The following specifications are indicative for standard GD Series heavy-duty single-table models. Working area, laser power and bed configuration can be customized based on material thickness and production requirements.
| Parameter | GD-3015 | GD-4020 | GD-6025 |
|---|---|---|---|
| Machine Type | Heavy-Duty Open-Type Single-Table Fiber Laser Cutting Machine | ||
| Working Area (L × W) | 3000 × 1500 mm | 4000 × 2000 mm | 6000 × 2500 mm |
| Laser Power Range | 6–30 kW | 6–40 kW | 12–40 kW |
| Bed Structure | 16 mm Super-Thick Steel Welded Bed · Stress Annealed · Heat-Isolated Hollow Design | ||
| Beam Material | T6 Heat-Treated Aviation Aluminum Alloy | ||
| Positioning Accuracy | ±0.03 mm | ±0.03 mm | ±0.03 mm |
| Repeat Positioning Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Max. Traverse Speed | 100–120 m/min | 100–120 m/min | 80–100 m/min |
| Max. Acceleration | 1.2 G | 1.2 G | 1.0 G |
| Table Type | Open-Type · Heavy-Duty Single Fixed Table | ||
| Drive Structure | Gantry Dual-Drive · Rack & Pinion | ||
| Control System | High-Power Bus CNC System | ||
| Power Supply | AC 380 V / 50–60 Hz (higher voltage configurations available) | ||
* Specifications above are indicative and based on standard heavy-duty single-table configurations. Bed dimensions, laser power and working area are customizable for specific thick-plate applications. Please contact TWCNC for the confirmed specification sheet and cutting capability assessment for your material and thickness range.
The GD Series is designed for applications where thick steel plates, high laser power and continuous heavy production place extreme demands on the machine frame.
Tell us your material type, maximum thickness, sheet dimensions and laser power requirements. The TWCNC application team will recommend the appropriate GD Series bed configuration and cutting head setup, and provide thick-plate cutting samples or process validation support.
Contact TWCNC for a Solution →Superheavy Bed Technology · High-Power Cutting Expertise · Installation & Process Support