Accessible Open Design, Dual-Pallet Productivity — Continuous Cutting Without the Full Enclosure
The B Series combines open-bed architecture with fast dual-pallet exchange system, giving sheet metal workshops the productivity of parallel loading and cutting without the investment and footprint of fully enclosed machine. Operators work in accessible environment while the laser keeps cutting — practical answer for high-mix, medium-volume production.
The B Series is an open-type exchange-table fiber laser cutting machine developed by TWCNC for fabricators who need continuous throughput but prefer the accessibility and lower cost of an open platform. Its two pallets shuttle between the cutting zone and the loading zone: while the laser processes a sheet on one table, the operator loads or unloads the other. Changeover happens in seconds, not minutes, and the machine spends dramatically less time waiting for material handling.
The open-bed structure provides unobstructed access from multiple sides, making it easy to position large or awkward sheets, inspect cuts and perform routine maintenance. Safety light curtains around the exchange area pause table movement instantly when an operator enters the zone, while zoned under-bed extraction captures smoke and dust without requiring full enclosure. The result is a machine that delivers exchange-table productivity in a simpler, more accessible and more economical package.

The B Series focuses on the practical middle ground: the continuous cutting rhythm of an exchange table, the accessibility of an open machine and an investment level that makes sense for growing fabrication businesses.
Two exchange tables operate in parallel: the laser cuts on one pallet while the operator loads the other. Exchange times of roughly 15–20 seconds keep idle time minimal and daily output high.
The open gantry design allows access from multiple sides for loading, unloading, inspection and maintenance — no enclosure doors or cabin constraints to slow down daily operations.
Infrared safety barriers surround the exchange zone and immediately pause table movement when an operator enters, delivering safe automated exchange without the cost of full enclosure guarding.
Segmented extraction beneath the cutting area captures fumes and dust downward even without an enclosure, keeping the workshop environment cleaner while reducing unnecessary extraction energy.
By removing the full enclosure and its associated cost and footprint, the B Series delivers exchange-table productivity at a more accessible price point — ideal for workshops upgrading from single-table machines.
A stress-relieved welded steel bed and servo-driven rack-and-pinion motion maintain flatness and accuracy under the repeated load cycling of exchange-table operation, with positioning accuracy at ±0.03 mm.
The following specifications are indicative for standard B Series open-type exchange-table models. Working area, laser power, pallet size and exchange configuration can be customized based on material and throughput requirements.
| Parameter | B3015 | B4020 | B6025 |
|---|---|---|---|
| Machine Type | Open-Type Exchange-Table Fiber Laser Cutting Machine | ||
| Working Area (per pallet) | 3000 × 1500 mm | 4000 × 2000 mm | 6000 × 2500 mm |
| Laser Power Range | 1500–6000 W | 2000–12000 W | 3000–12000 W |
| Exchange System | Dual-Pallet Shuttle · Approx. 15–20 s Exchange Time | ||
| Enclosure / Guarding | Open Bed · Safety Light Curtains Around Exchange Zone | ||
| Fume Extraction | Zoned / Segmented Under-Bed Extraction | ||
| Positioning Accuracy | ±0.03 mm | ±0.03 mm | ±0.03 mm |
| Repeat Positioning Accuracy | ±0.02 mm | ±0.02 mm | ±0.02 mm |
| Max. Acceleration | 1.2 G | 1.2 G | 1.0 G |
| Max. Linkage Speed | 100–120 m/min | 100–120 m/min | 80–100 m/min |
| Table Load Capacity | Approx. 800–1000 kg / pallet | Approx. 1000–1200 kg / pallet | Approx. 1200–1500 kg / pallet |
| Drive Structure | Gantry Dual-Drive · Rack & Pinion | ||
| Control System | Bus CNC System (Raytools/ BOCHU) | ||
| Power Supply | AC 380 V / 50–60 Hz · Three Phase | ||
* Specifications above are indicative and based on typical open-type exchange-table configurations. Exchange time, pallet load capacity and laser power vary with model size, drive configuration and customization. Cutting thickness capability depends on material type, laser power and process parameters. Please contact TWCNC for the confirmed specification sheet and layout drawing for your workshop.
The B Series suits workshops with regular sheet metal cutting demand that want to reduce loading/unloading downtime without moving to fully enclosed production platform.
Tell us your typical sheet sizes, material mix, thickness range and daily output target. The TWCNC application team will recommend the appropriate B Series pallet size, laser power and exchange configuration, and provide workshop layout drawing along with cutting samples.
Contact TWCNC for a Solution →Open-Access Productivity · Dual-Pallet Efficiency · Workshop Layout Support