Product Showcase


Tuowen CNC, Craft Precision, Create Value.

PS Series Semi-Automatic Loading Laser Tube Cutting Machine

Product Category: Tube Metal Cutting Machine

Tel:+86-13012543158

brand:

Product Details

PS Series Semi-Automatic Tube Laser Cutting Machine | TWCNC
TWCNC · PS Series

PS Series Semi-Automatic Tube Laser Cutting Machine

Purpose-Built for Tube · Semi-Automatic Loading · Servo-Follow Support · Bevel Cutting Ready

The PS Series is TWCNC's dedicated tube laser cutting platform — not a sheet machine adapted for pipe, but ground-up tube processing system. A semi-automatic loading rack feeds tubes into the chuck, a servo-follow support system tracks the rotating tube to prevent sag and deformation, and optional servo unloading and ±45° bevel cutting extend the machine from straight cutting to welding-ready end preparation. From 1.5 kW to 12 kW, with a maximum cutting length of 7,500 mm, the PS Series is built for tube fabricators who need        repeatable accuracy on round, square, rectangular and special-section profiles.

1500–12000 W          Laser Power Range
7500 mm          Max. Cutting Length
±0.05 mm          Cutting Accuracy
±45°          Bevel Cutting (Optional)
Get PS Series Solution & Quote →

PS Series: Tube Cutting Is Different Problem — Solved at the Platform Level

Tube laser cutting fails in ways sheet cutting does not: long tubes sag under their own weight, rotating profiles deflect differently depending on cross-section, and the cut end often needs a weld-ready bevel rather than square edge. The PS Series addresses these tube-specific realities directly. Its semi-automatic loading rack presents tubes to the chuck without manual lifting, while the servo-follow support system adjusts height in real time as the tube rotates — preventing the S-shaped deformation and tail-end whip that compromise accuracy on long workpieces.

Beyond straight cutting, the PS Series can be configured with servo unloading table for controlled part collection and ±45° bevel cutting capability for V-, Y-, K- and X-type weld preparations. With 12,000 mm maximum cutting length, 1.5–12 kW laser power and two-chuck clamping design, it covers the everyday range of tube fabrication — from thin-wall furniture tube to thick-wall structural pipe — on single dedicated platform.

Dedicated Tube Platform            Semi-Automatic Loading Rack            Servo-Follow Support System            Optional Bevel Cutting ±45°            12000 mm Max. Cutting Length
PS Series Semi-Automatic Tube Laser Cutting Machine

Tube-Specific Engineering, Not a Sheet Machine Retrofitted

Every major subsystem of the PS Series answers a tube processing problem — loading, support, clamping, unloading and edge preparation.

📥

Semi-Automatic Loading Rack

A storage rack presents tubes to the feeding position; a powered push mechanism advances the tube into the chuck. The operator guides and confirms, but no longer lifts long or heavy tubes manually. Loading capacity typically covers multiple tubes depending on diameter, reducing handling time between jobs.

📏

Servo-Follow Support System

Servo-driven support rollers track the tube’s rotation and adjust height in real time. This prevents sagging on long tubes, suppresses tail-end whip on spinning profiles and avoids the S-shaped deformation that a fixed support induces on non-round sections. The result is stable cutting accuracy across the full tube length.

📤

Servo Unloading Table Optional

A servo-controlled receiving table lowers cut parts in a controlled motion rather than letting them drop. This protects the cut edge, reduces noise and makes part collection predictable — especially valuable for long, heavy or finished-surface tubes.

📐

±45° Bevel Cutting Optional

A tube bevel cutting head enables V-, Y-, K- and X-type weld preparations up to ±45°. Beveled tube ends are produced in the same setup as the cut-off operation, eliminating a secondary chamfering or machining step and simplifying downstream welding.

🔩

Dual Pneumatic Chuck Clamping

Front and rear pneumatic chucks secure the tube with adjustable clamping force, accommodating different wall thicknesses without crushing thin-wall tube or allowing thick-wall pipe to slip. The rear chuck is equipped with an air-blow device to reduce debris accumulation inside the tube during cutting.

⚡

1500–12000 W Cutting Capability

With laser power from 1.5 kW to 12 kW and a 7,500 mm maximum cutting length, the PS Series covers a broad tube processing envelope — from thin-wall round and square tube to thick-wall structural sections — while maintaining cutting accuracy of ±0.05 mm and repeatability of ±0.03 mm.

PS Series Technical Specifications

The following specifications are indicative for standard PS Series semi-automatic tube laser cutting configurations. Tube diameter range, laser power and optional features are specified per project based on the material mix and finished-part requirements.

ParameterPS Series (Indicative Range)
Machine TypeSemi-Automatic Tube Laser Cutting Machine (Dual Chuck)
Laser Power Range1500 W / 2000 W / 3000 W / 6000 W / 12000 W
Max. Cutting Length6000 mm/9000 mm/ 12000 mm
Tube Diameter / Section RangeApprox. Φ10 – Φ550 mm (round) · Square / rectangular / special sections within equivalent envelope
Cutting Accuracy±0.05 mm
Reposition Accuracy±0.03 mm
Max. Running Speed60 m/min
Max. Acceleration0.5 G – 1 G
Loading MethodSemi-automatic: storage rack + powered push feeder
Support SystemServo-follow support (standard or optional, configuration-dependent)
Unloading MethodSemi-automatic with optional servo unloading table
Bevel CuttingOptional ±45° (V / Y / K / X type weld preparation)
Chuck ConfigurationDual pneumatic chucks · adjustable clamping force · rear air-blow
Laser SourceRaycus / MAX / IPG (configuration-dependent)
Laser HeadRaytools / BOCI (bevel head optional)
Servo MotorDelta / Yaskawa
Control SystemTubepro or equivalent tube cutting CNC
Applicable MaterialsRound tube, square tube, rectangular tube, oval tube, U-channel, angle, special profiles
Power SupplyAC 380 V / 50 Hz / Three-phase

* Specifications above are indicative and based on typical semi-automatic tube cutting configurations in the PS Series class. Model designations and exact parameters vary by project. Tube diameter range depends on chuck and support configuration. Bevel cutting capability and servo unloading table are optional and must be specified at order. Please contact TWCNC for the confirmed specification sheet and a cutting assessment based on your tube sizes, wall thicknesses and finished-part requirements.

Where Tube Cutting Accuracy Determines Assembly Fit

The PS Series is suited to fabricators whose production revolves around tube and pipe rather than flat sheet — especially where weld preparation, long-piece accuracy and repeatable loading matter.

Metal Furniture Frames        Fitness Equipment        Automotive & Motorcycle Tube Parts        Steel Structure & Truss        Scaffolding & Racking        Bicycle & E-Bike Frames        Handrails & Guardrails        HVAC & Ventilation Ducting        Machinery Tube Components        Tube Job Shops        Welding-Intensive Fabrication

Specify Your PS Series Tube Cutting Configuration

Tell us your tube types and diameters, maximum length, wall thickness range and whether you need bevel cutting or servo unloading. The TWCNC application team will recommend the appropriate PS Series power level and optional modules, and provide a tube cutting sample or process validation support.

       Contact TWCNC for a Solution →      

Dedicated Tube Platform · Semi-Automatic Loading · Servo-Follow Support · Bevel Cutting Ready

Related Products